DTF Transfers

DTF Heat Transfer, this can be applied to any combination of polyester/cotton, including 100% cotton.  These transfers are hot peel. 

You will need to email your digital design PNG to Blacksheepshirtllc@gmail.com with your order #

Every Heat Press is different, temps and pressure are not always accurate or even so adjusting for your individual press is necessary, we highly recommend a heat gun. WE ARE NOT RESPONSIBLE FOR ANY PRESSING ISSUES DUE TO INACCURATE TEMPERATURE OR PRESSURE

** Recommended for 100% Cotton Shirts, if using polyester place parchment paper inside to prevent any transferring through the shirt **

These REQUIRE AN ACCURATE PRESSURE AND TEMPERATURE. YOU MUST USE A HEAT GUN TO TEST THE ACCURACY OF YOUR PRESS PRIOR TO PRESSING.

Suggested heat press directions:

• 310 degrees; 
• IF YOUR USING A BUDGET PRESS (UNDER $600) we recommend increasing your heat by 10-20 degrees unless you have checked your temp with a heat gun.
• HEAVY PRESSURE 8-9 PSI. 
• Pre press for 7 seconds to remove wrinkles and moisture;
• Press for 10 seconds; leave on heat platen  for 5-10 seconds then HOT PEEL.
• No teflon, covers, pillows; you MAY need to make an exception AND USE A PRESSING PILLOW if you have problems obtaining a high enough pressure setting.
• PEEL SLOWLY, IF IT IS STICKING INCREASE YOUR HEAT AND PRESS IT AGAIN UNTIL IT PEELS EASILY. IF THE PRINT IS DULL IT WAS PRESSED TOO HOT, IF IT IS STICKING YOUR HEAT IS NOT HIGH ENOUGH.

Sizing:

Based on the design's longest side (length or width)

Due to the many variations in monitors and browsers, colors may appear different on different monitors. Computer monitors are not all calibrated equally and color reproduction on the Internet is not precise.

With these factors in mind we cannot guarantee your transfers will match 100% from batch to batch or to the colors you see on your computer monitor. We do our best to ensure all settings are repeated with each batch but please allow for some variances to occur.